Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$171.00
The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: 60mm to 70mm in 5mm increments (with aftermarket Riser Kit) - Extension length and rotation can be easily adjusted using the top bolt - Weight: 545g
$69.95
e*thirteen Press Fit Bottom Brackets - Adapts all e-thirteen and older Fifteen.G cranks to BB89.5 BB92 frames - Custom angular contact bearings TiNi models feature Ti Nitride races - EV-8015 includes chainline spacer kit for LG1 and non-APS cranks - e*thirteen's BB92 bottom bracket uses industry-exclusive dual-row bearings to fit big performance into a small BB shell - A center tube helps seal the BB shell - For 41mm ID pressfit frames - Bearings feature high-performance seals, and a custom grease specification delivers supreme durability and smooth spinning performance
$99.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 8mm - Outer Diameter: 22mm - Width: 7mm
$53.00
- Yari Solo Air A1 1 year service kit - Includes dust seals, foam rings, o-ring seals, SA sealhead
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$4.99
Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair
$9.00
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
$28.00
Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - Collar can be converted to QR
$28.00
Featuring a universal design that allows the switch from a bolt to a QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - Collar can be converted to QR - Machined from billet 2014 T6 aluminum - Bolt-compatible universal collars - Available in Black, Silver, Red, Blue, Purple, and Orange - Weight from 20g
$28.00
Featuring a universal design that allows the switch from a bolt to QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it. - Collar can be converted to QR
$34.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
$14.99
The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.
$39.00
Metric Coil springs are available in many sizes and weight ratings, allowing riders to take full advantage of their shock's rebound and compression adjustments by dialing in the spring rate and setting the correct suspension sag. - Coil springs are available in many sizes and weight ratings - Each are available separately and are not included with aftermarket shocks
$53.00
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too. Kits include a 3mm, 2x6mm, and 2x12mm, spacers.
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
$14.18
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$14.00
Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.
$28.00
Zipp Speed Weaponry Aero Bar Parts - Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware
$37.00
Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars. - Multiple kits can be used to reach desired height up to 80mm rise - Raises armrest and extensions together to maintain a comfortable wrist position - Kit includes a pair of risers, bolts specific to riser size, and mounting hardware - Risers are compatible with J2, J3, and J4 Aerobar brackets - Clamp diameter: 31.8mm
$30.00
What It Is Replacement hardware for ENVE carbon fiber seatposts. Who It's For Folks who need additional hardware for their ENVE seatposts. Why We Made It We get calls all the time for replacement hardware, so we made a little kit to make it easy for everyone.
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$30.99 - $61.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m
$5.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$74.99
End cap packs provide a little extra style to your housing end caps and cable tips.